Wagner Layer Check LC1000

Product Description

Features & Benefits

• Non-contact & non-destructive measurement – Patented technology (Advanced Thermal Optics) for non-contact and non-destructive layer thickness measurement at a distance of up to 50cm ** from the workpiece. The measuring distance and measuring angle can vary.
• Prompt corrections possible – Even with coatings that are still wet or have not yet been cured, the layer thickness can be determined and corrected if necessary.
• Measurement during the coating process – For uninterrupted production, the measurement can be carried out while workpieces are moving through the coating system.
• Workpieces with complex geometries – The Layer Check LC1000 determines the layer thicknesses easily, even on workpieces with crooked surfaces, on insides and edges.
• Different materials – Measurement of the layer thickness on metal, plastic, MDF, CFRP, glass and many other materials.
• Suitable for nearly all paints – Suitable for your specific requirements with a one-off calibration.
• Considerable material savings – since unnecessary repeat coating is avoided. This results in significant cost savings and protects the environment.

Powder Coating With powder coating, the layer thickness can be determined in good time before the curing process and readjusted as required. This allows material savings of up to 30% and also increases productivity Liquid Coating Even with liquid coating, measurements can be carried out before the material dries. This means consistent coating results, material and time savings and a quality that is always second to none.

Typical areas of application Metal coatings, such as for the automotive and transport industry. Domestic white goods and much more Plastic material MDF panels Corrosion protection Metal construction Suitable for nearly all paints

Technical Data

Further Information